Product Description

Technical Features

  The high degree of modularity is a design feature of SRC helical gearboxes range. It can be connected respectively with motors such as normal motor, brake motor, explosion-proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramics packing, logistics, plastics and so on. It is possible to set up the version required using flanges or feet.
 

 

Products characteristics 

  SRC series helical gear units has more than 4 types. Power 0.12-4kw; Ratio 3.66-54; Torque max 120-500Nm. It can be connected (foot or flange) discretionary and use multi-mounting positions according to customers requirements.

Ground-hardened helical gears;

Modularity,can be combined in many forms;

Aluminium casing, light weight;

Gears in carbonize hard, durable;

Universal mounting;

Refined design,space effective and low noise

Structure feature

Model illuminate

1

Code for gear units series

2

No F code means foot mounted.With F code B5 flange mounted.With Z code B14 flange mounted

3

Specification code of gear units 01

4

I,II,III,B5 Output flange specification,default I not to write out is ok  

5

IEC: Input flange  HS: shaft input

6

Transmission ratio of gear units

7

M1:Mounting position, default mounting position M1 not to write out is ok

8

Position diagram for motor terminal box,default position o°(R) not to write out is ok

9

No mark means without motor   Model motor(poles of power)

10

Voltage – frequency

11

Coil in position for motor, default position S not to write out is ok

 

 

4.2 Rotation speed n

 

n1 Gear units input speed

 

n2 Gear units output speed

 

  If driven by the external gearing,1400r/min or lower rotation speed is suggested so as to optimize the working conditions and prolong the service life.Higher input rotation speed is permitted, but in this situation,the rated torque M2 will be reduced
   

 

4.5 Service factor fs

 

The effect of the driven machine on the gear unit is taken into account to a sufficient level of accuracy using the service factor fs. The service factor is determined according to the daily operation time and the starting frequency Z. Three load classifications are considered depending on the mass acceleration factor. You can read off the service factor applicable to your application in following figure. The service factor selected using this diagram must be less than or equal to the service factor as given in the performance parameter table.

 

* starting frequency Z: The cycles include all starting and braking procedures as well as change overs from low to high speed

 

SRC02..(HS)  Performance parameter

 

kw

Output speed

Torque

Speed ratio

fs

Model

IEC

0.37

16.7rpm

204N.M

54

1.0

SRC02

80B5/B14

 

 

Helical gearbox outline dimension heet

Foot Code U V V1 V2 V3 W X X1 Y Z
B02 18 107.5 60 130 11 136 155 100 17
M02 25 85 110 120 9 112 145 80 15
M01 18 80 110 120 9 118 145 80 15
B01 18 87 50 110 9 118 130 90 15

SRC helical gearbox with motor mounting position and terminal box orientation

Package
1 pc / carton,several cartons / wooden pallet

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor
Layout: Cycloidal
Hardness: Soft Tooth Surface
Samples:
US$ 317.6/Piece
1 Piece(Min.Order)

|

Order Sample

SMRV150-20-132S4
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

90 degree gearbox

Role of Bevel Gears in a 90 Degree Gearbox

Bevel gears play a crucial role in enabling a 90 degree gearbox to change the direction of rotation while transmitting power between two intersecting shafts. Here’s how bevel gears fulfill their role:

Bevel gears are a type of gears with conically shaped teeth that allow them to mesh at an angle. In a 90 degree gearbox, two sets of bevel gears are used:

  1. Input Bevel Gear Set: The input bevel gear set consists of a pair of bevel gears that are mounted on the input shaft. These gears have their axes at a 90 degree angle to each other. As the input shaft rotates, the meshing of these bevel gears transmits motion and power to the intermediate shaft.
  2. Output Bevel Gear Set: The output bevel gear set, also consisting of a pair of bevel gears, is mounted on the intermediate shaft. These gears mesh with the input bevel gears and are oriented at a 90 degree angle to them. This arrangement results in a change of direction by 90 degrees from the input shaft to the output shaft.

By using two sets of bevel gears at a 90 degree angle to each other, the 90 degree gearbox effectively changes the direction of rotation while maintaining power transmission. Bevel gears are designed to handle the intersecting shafts’ angular motion and provide reliable torque transfer even in situations where the input and output shafts are not aligned in the same plane.

The bevel gear arrangement in a 90 degree gearbox allows for versatile applications, making it possible to transmit power and motion efficiently around corners and tight spaces in various industrial and mechanical systems.

90 degree gearbox

Contribution of 90 Degree Gearbox to Space-Saving Design

A 90 degree gearbox plays a crucial role in space-saving design by allowing power transmission to change direction efficiently within a compact layout. Here’s how it contributes to space-saving:

  • Compact Form Factor: A 90 degree gearbox is designed to make a right-angle change in power transmission direction, eliminating the need for a linear transmission path. This enables machinery and equipment to be designed in a more compact form, optimizing the use of available space.
  • Tight Arrangements: In situations where components need to be closely positioned, a 90 degree gearbox efficiently redirects power around obstacles and tight corners, enabling parts to be placed closer together without compromising functionality.
  • Reduced Transmission Length: Traditional linear power transmission systems would require more space to change direction, especially in tight layouts. A 90 degree gearbox allows power to change direction quickly, minimizing the length required for transmission, and thus saving space.
  • Flexible Layouts: Space-saving 90 degree gearboxes offer designers the flexibility to create intricate layouts, especially in constrained environments. This flexibility can lead to more innovative and optimized designs.
  • Integration: Integrating a 90 degree gearbox directly into the machinery eliminates the need for additional components that would otherwise be required for power redirection. This integration conserves space and simplifies the overall design.

Overall, a 90 degree gearbox’s ability to efficiently change power transmission direction in a compact manner is essential for creating space-saving designs across various industries and applications.

90 degree gearbox

Applications of a 90 Degree Gearbox

A 90 degree gearbox, also known as a right-angle gearbox, finds diverse applications across various industries due to its ability to change the direction of rotational motion by 90 degrees. Some common applications include:

  • Automotive Industry: 90 degree gearboxes are used in automotive drivetrains to transfer power from the engine to the wheels, especially in front-wheel drive configurations.
  • Conveyor Systems: These gearboxes are employed in conveyor systems to change the direction of material flow at right angles, allowing efficient material handling and sorting.
  • Printing Machinery: In printing presses, 90 degree gearboxes enable the smooth transfer of motion from the main motor to various rollers and components, ensuring accurate paper movement.
  • Machine Tools: They are used in machine tools such as milling machines and lathes to transmit power at right angles, enabling precise machining operations.
  • Robotics: 90 degree gearboxes play a crucial role in robotic arms, allowing joints to move and rotate in different directions while maintaining a compact design.
  • Marine Applications: They are used in marine propulsion systems to change the direction of power transmission from the engine to the propeller shaft.
  • Industrial Equipment: These gearboxes are utilized in various industrial equipment like pumps, compressors, and generators to transmit power efficiently at right angles.
  • Medical Equipment: They find use in medical devices and equipment that require compact design and efficient power transmission at different angles.

The versatility of 90 degree gearboxes makes them a valuable component in applications that require changing the direction of motion while maintaining space efficiency and power transmission integrity.

China Professional Smrv150 90 Degree Gearbox Motovario-Like Nmrv Series Worm Gear Reducer Gearbox   car gearbox	China Professional Smrv150 90 Degree Gearbox Motovario-Like Nmrv Series Worm Gear Reducer Gearbox   car gearbox
editor by CX 2024-03-29