Product Description

1: 1 Ratio 90 Degree Right Angle Pto Output Shaft Gearbox T Series Gear Steering T6 Speed Increasing Helical Gearbox for Elevator

T Series Spiral Bevel Gear Steering Device

1.T series spiral bevel redirecor with various types are standardized,all ratios 1:1  1.5:1  2:1  2.5:1  3:1  4:1 and  5:1 are actual ones.Average efficiency is 98%.
2.There are 1 input shaft,two input shafts,unilateral output shaft and double side output shaft.
3.Spiral bevel gear can rotate in both directions and transmit smoothly, low noisemlight vibration, high performance.
4.If ratio is not 1:1,if input speed on single-extendalbe shaft,output speed will be reduced;
    if input speed on double- extendable shaft output speed will be reduced.

Our Factory:

1. Shell: made of high rigidity fc-25 cast iron;
2. Gear: high purity alloy steel 20crmnt is used for quenching and tempering, carburizing, quenching and grinding;
3. Spindle: high purity alloy steel 40Cr quenching and tempering processing, with high hanging load capacity.
4. Bearing: equipped with tapered roller bearing with heavy load capacity;
5. Oil seal: imported double lip oil seal, with the ability of dust and oil leakage.
Product lubrication:
The use of proper lubricating oil for t spiral bevel gear commutator can give full play to the efficiency of the steering gear and improve its service life.
1. The initial wear period is 2 weeks or 100-200 hours. There may be a small amount of metal wear particles between them. Please clean the interior and replace it with new lubricating oil;
2. In case of long-term use, change the lubricating oil every half a year or 1000-2000 hours.
Technical parameters of T spiral bevel gear commutator:
It can be equipped with single horizontal axis, double horizontal axis, single vertical axis and double vertical axis 1:5, 1:5, 1:1, 1:5, 1:5, 1:1

Related products:

Application:

Company Profile: /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

90 degree gearbox

Examples of Vehicles and Equipment Using 90 Degree Gearboxes

90 degree gearboxes are commonly used in various vehicles and equipment where a change in direction of power transmission is required. Here are some examples:

  • Automobiles: Many vehicles use 90 degree gearboxes to transmit power from the engine to the wheels, especially in front-wheel drive configurations where the engine is mounted transversely.
  • Construction Machinery: Equipment like excavators and loaders use 90 degree gearboxes to change the direction of power in hydraulic systems that control movements.
  • Agricultural Equipment: Tractors and combines often employ 90 degree gearboxes to transfer power from the engine to various components like the drivetrain and attachments.
  • Marine Applications: Boats and ships use 90 degree gearboxes to change the direction of propulsion power from the engine to the propellers.
  • Industrial Machinery: Many industrial machines use 90 degree gearboxes to transmit power in different directions, enabling complex movements and operations.
  • Printing Presses: Printing presses often use 90 degree gearboxes to change the direction of power transmission between different sections of the machine.
  • Textile Machinery: Textile manufacturing equipment may use 90 degree gearboxes to change the direction of power for various processes.
  • Material Handling Equipment: Conveyor systems and other material handling equipment use 90 degree gearboxes for changing the direction of movement.
  • Robotics: Robotic arms and mechanisms often utilize 90 degree gearboxes to achieve precise movements and positioning.
  • Food Processing Equipment: Machinery used in food processing may use 90 degree gearboxes to change the direction of power transmission in various stages of production.

These examples highlight the versatility and importance of 90 degree gearboxes in a wide range of applications across different industries.

90 degree gearbox

Differences between 90 Degree Gearbox and Right-Angle Gearbox

A 90 degree gearbox and a right-angle gearbox are terms often used interchangeably, but they do have some differences:

  • Terminology: Both terms essentially refer to the same concept of changing power transmission direction by 90 degrees. “90 degree gearbox” is a more specific term, while “right-angle gearbox” is a broader term that encompasses gearboxes changing direction by any angle that’s considered a right angle.
  • Angle Range: A 90 degree gearbox is specifically designed to change power transmission direction by a perfect 90-degree angle. On the other hand, a right-angle gearbox can change direction by any angle between 0 and 180 degrees, as long as the change is considered a right angle.
  • Design Variety: Right-angle gearboxes can include gearboxes with angles slightly less than 90 degrees or even more than 90 degrees. They provide greater design flexibility to accommodate various space constraints and layouts.
  • Specificity: When someone refers to a “90 degree gearbox,” it often implies a very specific purpose of changing direction by exactly 90 degrees. In contrast, a right-angle gearbox could encompass a wider range of applications and angles.
  • Application: Both types of gearboxes are commonly used in various industries and applications where space constraints or specific layout requirements demand a change in power transmission direction without extensive use of additional components.

Ultimately, while the terms “90 degree gearbox” and “right-angle gearbox” are related, the former refers to a precise 90-degree change in direction, while the latter has a broader scope covering a range of right-angle changes.

90 degree gearbox

Industries Using 90 Degree Gearboxes

90 degree gearboxes, also known as right-angle gearboxes, find application in a wide range of industries due to their ability to change the direction of rotational motion by 90 degrees. Some of the industries that commonly use 90 degree gearboxes include:

  • Automotive: 90 degree gearboxes are used in automotive applications for power transmission and changing the direction of motion, such as in differential assemblies.
  • Industrial Manufacturing: These gearboxes are employed in industrial machinery and equipment where space constraints require motion to be redirected at right angles.
  • Mechanical Engineering: Mechanical systems often require changes in motion direction, and 90 degree gearboxes are used to achieve this efficiently.
  • Robotics: Robotics applications involve complex motion systems that often require motion to be redirected. 90 degree gearboxes play a role in achieving this efficiently.
  • Automation: Automated systems in industries like packaging, material handling, and assembly lines utilize 90 degree gearboxes to optimize space and motion control.
  • Aerospace: Aircraft and aerospace applications benefit from the compact design and efficient motion redirection capabilities of 90 degree gearboxes.
  • Renewable Energy: Wind turbines and solar tracking systems often use 90 degree gearboxes to optimize the orientation of components.
  • Marine: Marine equipment and vessels require motion to be transmitted and redirected in various directions, making 90 degree gearboxes valuable.
  • Material Handling: Conveyors, lifts, and material handling systems use these gearboxes to efficiently redirect motion in confined spaces.

The versatility of 90 degree gearboxes makes them a crucial component in these industries and many others, contributing to the overall efficiency and functionality of various applications.

China Good quality 1: 1 Ratio 90 Degree Right Angle Pto Output Shaft Gearbox T Series Gear Steering T6 Speed Increasing Helical Gearbox for Elevator   gearbox and motor	China Good quality 1: 1 Ratio 90 Degree Right Angle Pto Output Shaft Gearbox T Series Gear Steering T6 Speed Increasing Helical Gearbox for Elevator   gearbox and motor
editor by CX 2024-04-23